Mahij Brand: Cap. 38mm Pillar Drilling Machine With Cone Pulley And Back Geared Type And Without Electrical.
Model: Mahij 38/335
Specification | MAHIJ 38/335 |
Tilting working table | FIXED |
Drilling capacity | 38/35mm |
Pillar Diameter | 110 mm |
Spindle nose to table distance | 625 mm |
Distance from spindle nose to base distance | 1000 mm |
Distance from spindle centre to pillar surface (in mm) | 285 mm |
Table travel | 600 mm |
Taper in spindle | MT-4 |
Number of speed | 8 Speed |
Range of speed (RPM) | 70 to 2000 |
Table size ( in mm ) | 415x 415 |
Base size (machining area in mm ) | 410x 360 |
Over all base size (in mm) | 650 x 450 |
Spindle travel | 250 mm |
Pillar length | 1425 mm |
Over all height with pulley guard | 1750Mm |
v-belt section | B-60 |
Weight (Approx) | 310KG |
Motor 1440 RPM 3 Phase 440 Volts | 1.5 H.P. |
Shipping wooden case inner size L x W x H | mm |
Extra Accessory: Electric motor, R & F Switch, Drill Chuck, Arbor, Key-way compound slide, Coolant pump with tank, Drill vice, Motor belt, machine lamp.
Note: The design & specification of our products shown or photo or catalogue are subject to change for improvement without any prior notice.
![]() |
MAHIJ EXIM PRIVATE LIMITED
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Ltd. |